Search
Close this search box.
Search
Close this search box.
segment_gas-supply

Truma LevelCheck

Filling level display for gas cylinders

Use LevelCheck to find out how much gas is left in the gas cylinder in just a few seconds. Using ultrasound, the handy filling level indicator shows whether there is liquefied gas within the measuring range. Simply place Truma LevelCheck horizontally on the cylinder: if the LED is green, there is gas in the cylinder. After measuring, LevelCheck switches off automatically.

Measures quickly and reliably in just a few seconds
Easy to use, with LED display, ready to use immediately
Suitable for all steel and aluminium LPG cylinders with diameters of 200 to 350 mm
Lightweight but sturdy
Integrated LED torch for checking gas in the dark

Technical Details

Power supply
E-block 9 V
Gas cylinder
All steel and aluminium LPG cylinders with diameters of 200 to 350 mm
Gas type
Propane / butane
Weight
approx. 100 g (incl. battery)

Highlights

More details about Truma LevelCheck

Use LevelCheck to find out how much gas is left in the gas cylinder in just a few seconds. Using ultrasound, the handy filling level indicator shows whether there is liquefied gas within the measuring range. Simply place Truma LevelCheck horizontally on the cylinder: if the LED is green, there is gas in the cylinder. After measuring, LevelCheck switches off automatically.

The filling level display for gas cylinders is suitable for much more than just the camp site or barbecue. You can also use Truma LevelCheck to check the level of the cylinder for the gas hob or wok burner in your kitchen. This handy device will ensure that you are not stranded without gas for your DIY projects. By the way: to ensure reliable measurement, we advise that you clean the measuring head regularly with a damp cloth.

  • Measures in a temperature range of -15 to +40 degrees Celsius
  • Not suitable for plastic gas cylinders, refillable gas cylinders, gas tanks or butane cylinders (Campingaz)

Alternative products

FAQ

  • How do I use the Truma LevelCheck properly?

    Attach the Truma LevelCheck horizontally to the gas cylinder at an angle of 90°. The filling level is measured by an ultrasound signal. If liquefied gas is present within the measuring range, the signal is transmitted and reflected on the opposite wall of the cylinder (echo). The measurement result is shown by a green LED. A high-pitched acoustic signal is also output.

    If there is no gas at the measured point, the signal is not transmitted and there is no echo. In this case, a red LED lights and a deeper acoustic signal is output.

    If the LED on LevelCheck is green, there is gas in the cylinder. The red LED indicates that there is no gas at the measured point.

  • Which gas cylinders can be measured with the Truma LevelCheck?

    Truma LevelCheck is suitable for all steel and aluminium LPG gas cylinders with diameters of 200 to 350 mm.

    It cannot measure plastic cylinders because they do not reflect the signal. Gas tanks and refillable gas cylinders can also not be measured due to inner components that divert the signal.